PRECAUTIONS TO BE TAKEN DURING MAINTENANCE 2.8 PRECAUTIONS TO BE TAKEN DURING MAINTENANCE 2.8.1 WARNING PLATES Before starting any maintenance operation, position the machi- ne on a firm and level surface, rest the equipment on to the ground, engage the safety locks of either the equipment and the controls and stop the engine. If another person starts the engine and operates the control le- vers while the operator is providing for service, this may result in serious injuries or even death.
DO NOT START ENGINE To avoid these risks, always attach warning plates to the control levers and to the ignition key before performing any maintenan- ce operation; if necessary, attach additional warning tags also around the machine and in particular on the cab handles. RWA01210 NON METTERE IN MOTO RWA35120 2.8.2 TOOLS Use only the tools provided with the machine and high-quality tools suitable for the tasks to be performed. Do not use worn, damaged, low-quality tools or tools that are not suitable for the tasks to be performed, in order to avoid any personal injury. After use, always put the tools in the appropriate compartment (1) positioned behind the driverнs seat. RWA01310 46