INSTRUMENTS AND CONTROLS 3 - BUCKET LIFTING CONTROL LEVER DANGER Before carrying out any manoeuvre with this lever, the operator must be seated in the work position with fastened safety belt; before any manoeuvre he must perform the operations described in “3.13 USING THE WORK EQUIPMENT”. When travelling on roads, always lock the equipment control (see “3.3.5 pos. 8 EQUIPMENT CONTROL LOCKING LEVER”). Before leaving the operating position, lower the equipment to the ground and lock the safety bars (verti- cal position), then stop the engine. Failure to comply with these instructions may lead to serious accidents.
The equipment control lever (3) is positioned on the operatorнs right and controls the arm lifting and lowering and the bucket dumping and folding functions. The following diagrams show the basic manoeuvres and the pos- sible combined manoeuvres. BASIC MANOEUVRES N - Neutral A - Arm lowering B - Bucket dumping C - Arm lifting D - Bucket folding 83 A D N B C RWA22430