400 Series 13 Backplate and rear oil seal To remove and to fit Operation 13-5 Only the 404C-22 engines / models have the backplate and the housing fitted together. Note: On assembly ensure that Powerpart silicone sealant is used between the cylinder block and the rear end oil seal. 1 2 H1110 Workshop Manual, TPD 1458E, issue 3 - Perkins Confidential: Green 101 Engine Torque Nm (lbf ft) kgf m 403C-11 Setscrew - backplate 50 (36.9 Setscrew - housing 50 (36.9 403C-15 404C-22 404C-22T Setscrew - backplate 25 (18.8 Setscrew - housing 25 (18.8