Perkins — To inspect and to correct Operation 3-17

400 Series 3 Valve seat width # To inspect and to correct Operation 3-17 If the contact face (1) of the valve seat is more than the service limit, check the valve stem for wear, see Operation 3-14 and the cylinder head to valve stem clearance, see Operation 3-15. If greater than the service limit, use a seat cutter of 45° to correct the seat. If the valve stem clearance exceeds the service limit, renew the valve. If the bore in the cylinder head for the valves is worn, replace the cylinder head. If the valve seat in the cylinder head is damaged or worn, cut a new seat if the valve depth will remain within tolerance.

1 45° H1050 Contact Width Workshop Manual, TPD 1458E, issue 3 - Perkins Confidential: Green 29 Special tools Description Part number Valve seat cutter 27610030 Engine Inlet valve Clearance mm (in) Standard Service limit Exhaust valve Clearance mm (in) Service limit Standard Service limit 403C-11 1,70 - 2,10 (0.0670 - 0.0830) 2,5 (0.098) 1,70 - 2,10 (0.0670 - 0.0830 ) 2,5 (0.098) 403C-15 1,66 - 1,87 (0.0653 - 0.0736) 2,5 (0.098) 1,66 - 1,73 (0.0653 - 0.0681 ) 2,5 (0.098) 404C-22 404C-22T 1,50 - 2,00 (0.0591 - 0.0790) 2,5 (0.098) 1,94 - 2,16 (0.0764 - 0.0850 ) 2,5 (0.098)