5 400 Series Crankshaft retaining bolts and crankshaft To remove and to fit Operation 5-2 Cautions : Ensure that the lubricating oil pressure relief valve has been removed before the crankshaft is removed or fitted. Ensure that the oil ways in the bearings align with the oil ways in the cylinder block. Remove the bearing holder setscrews (1) and lift the crankshaft assembly out vertically. Note: If the crankshaft or crankshaft bearings are replaced the fuel adjustment screw must not be altered from the original setting. The maximum no load speed must be checked after assembly. 1 H1063 46 Workshop Manual, TPD 1458E, issue 3 - Perkins Confidential:
Green Engine Torque Nm (lbf ft) kgf m Crankshaf 403C-11 Crankshaf t bearing holder setscrew 2 7 (19.9) 2, t bearing holder to block (allen screws) 2 7 (19.9) 2, 403C-15 Crankshaf 404C-22 Crankshaf 404C-22T t bearing holder setscrew 5 2 (38.3) 5, t bearing holder to block (allen screws) 2 7 (19.9) 2,