6 400 Series Maximum fuel screw and maximum speed screw Location Operation 6-8 14 (10.3) 1,4 14 (10.3) 1,4 Caution: The fuel adjustment setscrew must be set correctly for the engine to comply with emissions legislation. This must only be carried out by an approved Perkins distributor. Notes: The maximum fuel setscrew (1) and the maximum speed setscrew (2) must not be adjusted by the operator. Under certain circumstances it may be necessary to remove the anti tamper device for the maximum fuel setscrew. This must only be carried out by an approved Perkins distributor.
Any adjustment to the maximum fuel screw will require an engine test brake, and also a check of maximum no load speed to confirm the settings. 1 3 2 H1075 58 Workshop Manual, TPD 1458E, issue 3 - Perkins Confidential: Green Engine Torque Nm (lbf ft) kgf All models Maximum fuel screw lock nut Maximum speed screw lock nut