400 Series 6 Oil pump end float To check and adjust Operation 6-13 Use a feeler gauge to check the oil pump end float (2). Adjust with 0,1 - 0,15 - 0,2 and 0,5 mm shims (1). Engine Standard clearance mm (in) Service limit mm (in) All models 0,10 - 0,15 (0.0040 - 0.0060) 0,20 (0.0079) 1 2 H1080 Workshop Manual, TPD 1458E, issue 3 - Perkins Confidential: Green 63