400 Series 10 Lubrication system 10 Lubricating oil canister To fit Operation 10-1 1 Lubricate the seal with clean engine oil before assembly. 2 Tighten by hand until the seal contacts the mounting face of the block. 3 Tighten the canister by a further Ѕ to ѕ of a turn by hand only. Note: Do not overtighten oil filter. 4 The modine cooler (1) and fastener (2) are fitted only to the 404C-22T. 1 2 H1119 Workshop Manual, TPD 1458E, issue 3 - Perkins Confidential: Green 77