Perkins — To remove and to fit Operation 11-3

11 400 Series Fuel injection pump To remove and to fit Operation 11-3 Engine Torque Nm (lbf ft) kgf m 403C-11 Fuel injection pump fasteners 6 (4.4) 0,6 403C-15 404C-22 404C-22T Fuel injection pump fasteners 15 (11) 1,5 Caution: Connections should be blanked off until assembly. Notes: If the fuel injection pump is renewed, shims of the same thickness as originally fitted should be used. If a new fuel injection pump is fitted, it should be replaced with a fuel pump with the same part number as originally fitted. When the fuel injection pump is replaced it is essential that the fuel adjustment screw is not altered from the original setting.

The maximum no load speed should be checked after assembly. H1100 88 Workshop Manual, TPD 1458E, issue 3 - Perkins Confidential: Green