Komatsu — SWITCHES

. OPERATION DETAILED CONTROLS AND GAUGES Room Lamp Switch NOTICE It is possible to turn on the interior cab room lamp even when starting switch is in the OFF position, do not forget to turn it off. Use this switch (12) to light up the room lamp. (a) ON position: Lamp lights up (b) OFF position: Lamp goes out The room lamp lights up even when the starting switch is at the OFF position 3 - 75 Emergency Pump Drive Switc h able you to carry out operation temporarily, when any problem occurs on the pump control n emergency. Furthermore, remove the cause of the problem immediately. NOTICE This switch is provided to en when system. Do not use it except i n emergency.

Furthermore, remove the cause of the problem immediate If this switch is depressed an d moved to the EMERGENCY position by mistake, thereby engaging th e machine in the work, while the machine is in norma If "E02" is displayed during th l condition, an "E02" mark is shown in th e display. e work, check that the switch is in the NORMAL position. This switch (13) is used to ma ke it possible to carry out operations temporarilyif any problem sho uld occur in the pump control system (when the display shows "E0 2"). If the display shows "E02", m ove the switch up to make it possible to carry out work.

Swing Parking Brake Release Switch NOTICE This switch makes it possible to perform swing operations for a short eve n when there is a problem in t he swing parking brake electric system. DO NOT use this switch except in emergencies. Repair th e problem as soon as possible . This switch (14) is used to ma ke it possible to carry out operations temporarily if any problem sho uld occur in the swing parking brake system (when the upper structure doe s not swing but the display does not show "E03"). If the display does not sho w "E03", move the switch up to FREE sible to carry out work. position (a) to make it pos When the switch is moved to FREE position (a), the swing lock monitor flashes.