. OPERATION MACHINE OPERATIONS AND CONTROLS MACHINE OPERATIONS AND CONTROLS BEFORE STARTING ENGINE WARNING and hoses. If any problem is 4. Check for leakage from fuel line. Check that there is no leakage of fuel or damage to the hoses and tubes. If any problem is found, carry out repairs. idler, guard) for damage, wear, loose bolts, or leakage of oil from 3 - 111 Walk-around Checks Before star ting the engine, walk around the machine and look at the u nderside o f chassis for anything unusua l like loose bolts and nuts, leakage of fuel, oil and coolant. Also check the condition of the work equipment and the ystem.
for loose wiring, play, and collection of dust at places that reach high temperature. hydraulic s Also check for loose wiring, play, and c ollection of dust at places that reach hig h tempera Remove any flammable materials from aroun d the battery, engine, muffler, turb ocharger, o r other hig h temperature engine parts. Leakage of f uel or oil will cause the machine t o catch fire. Check carefully, be su re to repair any proble m, or contact y our Komatsu distributor. Perform th e following inspections and cl eaning every day before start ing engine for the d 1. Check for damage, wear, play in wo rk equipment, cylinders, linka ge, hoses Check found, 2.
Remov e dirt and debris from around the engine, battery, and radi ator. Check etc.) ar flamma For the FINS, for dirt accumulated around th e engine and radiator. Also ch eck for flammable m aterial (dry le aves, t wigs, ound the battery, engine mu ffler, turbocharger, or other high temperature engine parts. If any dirt or ove them. ble materials are found, rem method of removing dirt from the radiator, see "CLEAN AND INSPEC T RADIAT OR FINS, OI L COOLER AFTERCOOLER FINS AND CONDENSER FINS (PAGE 4 -62)". 3. Check for coolant and oil leakage ar ound the engine Check it. for oil leakage from the engin e and coolant leaks from the c ooling system. If any problem is f ound, r epair 5.
Check for oil leakage from hydraulic equipment, hydraulic tank, h oses, and Check for oil leakage. If any proble m is found, repair the area whe re oil is le 6. Check the undercarriage (track, spr roblem is found, repair it. rollers. If any p 7. Check for problems in handrails, ste roblem is found, repair it. Tig 8. Check for problem in gauges, monit or. Check Clean for problem in the gauges an d monitor in the operator's ca b. If any pr oblem is found, replac e the p arts. off any dirt from the surface.