Komatsu — BEFORE STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS Rearview Mirrors WARNING 3 - 123 Be sure to adjust the mirrors bef ore starting work. If th ey are not adjusted properly, you cannot se cure the visibility an d may be injur ed or may injure someon e seriously. When a djusting t he angle of the mirror over the counterweight, provide a secure scaffold using a step ladder and then carry out the work. Do not do the work standing on the counterweight, a s there is always the danger of a s erious injury due to f alling- off from the machine. Mirror (A) e mirror mount so that it is possible to see people at the f the machine. Adjust th e mirror rear left o f the machine.

Install the side view mirror in the location i ndicat ed in the figure at righ t. mm (1.4 in) rror securing stay (1) the way the side view mirror es outward to the maximum. (L): 35 mm (1.4 Fix mi stretch es outward to the max If the s ide view mirror does n ot move smoothly when adjusting its angle, loosen mirror securing bolt (2) and mirror securing stay bolt (3). Tightening torque of bolt (2): 4.0 - 5.4 Nm (0.41 - 0.55 kgm, 3 - 4 lbft) its ang le, loose n mirror securi ng bolt (2) an d mirro r securin g stay bolt (3 Tightening torque of bolt (2): 4.0 - 5.4 Nm (0.41 - 0.55 k gm, 3