. ATTACHMENTS AND OPTIONS ATTACHMENT GUIDE TRACK SHOES SELECTION Select the appropriate track shoe to match the operating conditions. Selection Check the category from the usage table below and select the track shoe from the table at the bottom. Use category B is for wide shoes. There are limits for the use of wide shoes, so check carefully when using. Investigate the conditions of use carefully and consider the situation to select the most suitable track shoe. When selecting the shoe width, shoe possible that will cause no problem within the range for flotation and ground contact pressure of the machine.
If a larger width of the necessary is used, there will be a greater load on the track shoe, and this will cause problems such as bending of the track shoes, cracking of the links, breakage of pins, and loosening of shoe bolts. 6 - 21 PC350, PC350LC Thi s is t he combination ta bl e for a ttachments installed to th e standard HD a rm. {: U: ¯: Can be used Can be used onl y for lig ht duty wor Cannot be used NOTICE Wh en th e boom is fully lowered durin g oblique digging, th e boom interferes with the undercarriage. Operate the boom carefully. The items marked * are f or when the side cutter is i nstalled.
Name of bucket Capacity (m3) Outside width (mm) Use Standard arm (3.4 m) * Rock bucket (standard) 1.80 1,425 Loading { Ripper bucket 1.16 1,250 Digging rocks { Category Use Precautions for use A Rocky ground, riverbeds, normal soil B Normal soil, soft ground C Paved road surface Be careful on slopes. Flat shoes have low gradeability. PC300 PC350 PC300LC PC350LC Specifications Category Specifications Category Specifications Category Specifications Category Standard 600 mm Triple A 600 mm Triple A 600 mm Triple A 600 mm Triple A Option 700 mm Triple B 700 mm Triple B 700 mm Triple B 700 mm Triple B Option 800 mm Triple B 800 mm Triple B Option 700 mm Flat C 700 mm Flat C