Komatsu — MONITORING SYSTEM

. OPERATION DETAILED CONTROLS AND GAUGES should be in the green range. If the indicator enters the red range (A) during operations, the hydraulic oil temperature is 102 ° C (215.6 ° F) or more. Run the wait for the hydraulic oil Display (G) at low temperatures: Monitor background (K) is white Display (H) at correct temperatures: Monitor background (K) is blue Display (J) when condition is abnormal: Monitor background (K) is red should be in the green 3 - 23 Hydraulic Oil Temperature Gauge This m eter (11) shows the hydraulic oil During engine at temperatur (A) - (B) low idling or stop it and e to go down. : Red range : Green range :

White range (A) - (D) (D) - (C) REMAR When the i ndicator reaches red range Red range (A) position: 102°C (215.6° Red range (B) position: 105°C (221°F) When the i ndicator is in red range (A) - (B), hydraulic oil temperature monitor (E) shows the When the engine is started, if the ind icator is at position (C) and the hydraulic oil temper hows the low-temperature display. If this happens, c Equipment Warm Up (PAGE 3-137)". ature is 20°C (68°F), hydraulic o il temperature monitor (E) s arry out the warm-up operation. For details, see "Hydraulic Fuel Gauge This m eter (12) shows the amount of fue During normal operations, the indicat ndicator starts to enter red range range.

If the i is less than inspection (A) - (B) 100 liters (26.42 US gal) of and add fuel. : Indicates red range : Indicates green range (A) - (C) REMAR K When the i ndicator reaches red range (B), there is less than 60 liters (15.85 US gal) of fuel r When the i ndicator is in the red range ( B), fuel level monitor (D) lights up red. The co rrect fuel level may not be displa yed for a short time when the starting switch is turned ON, but this is not an abnormalit y.