Komatsu — 21.1 INTRODUCTION OF NECESSARY TOOLS

21. ~T&llDARD TIGHTENING TORQUES FOR BOLTS AND 21.1 INTRODUCTION OF NECESSARY TOOLS The following tools are needed when carrying out maintenance. No. Name of tool 1 Wrench set 09000-30006 Applicable width across flats (S, - S,) Part No.

I Remarks 8 mm - 10 mm, 12 mm - 14 mm 13 mm - 17 mm, 19 mm - 22 mm s2 I 1 24 mm-27mm,30mm-32mm AD053370 2 3 Screwdriver Socket wrench set 09033-00190 Interchangeable flat-head and cross-head type 09020-I 0284 Applicable width across flats 10 mm, 13 mm 14 mm, 17 mm Extension, Handle, Joint 19 mm, 22 mm, 24 mm, 27 mm, 30 mm, 32 mm, 36 mm Wrench 09002-03641 36mm-41 mm Socket 195-98-l 1590 Applicable wide across flats 41 mm Socket 178-98-11120 Applicable wide across flats 46 mm Plier 09036-00150 8 Hammer 09039-00150 9 Bar 09055-I 0390 10 Filter wrench 09019-08035 For filter cartridges 11 Grease pump 07952-80002 For greasing work 12 Nozzle 07951-I 1400 For greasing work 13 Grease cartridge 07950-90403 (Lithium base grease, 400 g) 14 Gaune 09054-00009 If any of the above tools are broken, please order them from your Komatsu distributor.

When not using the tools, always put them in the tool box on the inside of the battery inspection cover on the left side of the machine. 3-13