NOTICE If small holes or thinner parts are found on the element when it is checked with an electric bulb after cleaning and drying, replace the element. Do not use an element whose damaged. When cleaning the element, do something. folds or gasket or seal are not hit it or beat it against 4. Set the cleaned element. AE083080 5. Cleaning or replacing for three outer elements should be carried out at the same time. REPLACING INNER ELEMENT 1. First remove the outer element, and then remove the inner element. 2. To prevent dust from getting in, use a clean cloth or tape to cover the air connector (outlet side). 3. Clean the air cleaner body interior, then remove the cover installed in Step 2. 4.
Fit a new inner element to the connector and tighten it with nuts. Do not clean and reinstall a inner element. 5. Install the outer element. 6. After replacing the element, press button of the dust indicator to return the red piston to its original position. 3-27