Komatsu — 24.3 CHECK BEFORE STARTING

24. SERVICE PROCEDURE 24.3.8 CHECK DUST INDICATOR Check that the red piston has not appeared in the transparent portion of dust indicator 0. If the red piston has appeared, clean or replace the element immediately. For details of the method of cleaning the element, see “24.2 WHEN REQUIRED”. After checking, cleaning, and replacing, press the knob of dust indicator @ to return the red piston to its original position. 24.3.9 CHECK ELECTRIC WIRINGS AD052091 in the electric wiring, always locate and repair the cause. Check for damage of the fuse and any sign of disconnection or short circuit in the electric wiring. Check also for loose terminals and tighten any loose parts.

Check the following points carefully. l Battery 0 Starting motor l Alternator Please contact your Komatsu distributor for investigation and correction of the cause. A WARNING Accumulation of flammable material (dead leaves, twigs, grass, etc.) around the battery may cause fire, so always check and remove such material. When carrying walk-around checks or checks before starting, always check if there is any accumulation of flammable material around the battery, and remove such flammable material. 3-42