Komatsu — 24.6 EVERY 1000 HOURS SERVICE

24. SERVICE PROCEDURE 24.6.3 CLEAN STEERING CLUTCH CASE BREATHER 1. Remove bolts 0, then remove cover 0. 2. Remove breather @ on steering clutch case, and wash out dust remaining inside with diesel fuel or flushing oil. 24.6.4 CHECK OIL LEVEL IN RECOIL SPRING, ASSIST CYLINDER CASE, ADD OIL a WARNING When checking the oil level or adding oil, the system is under internal pressure, so loosen plugs, and check that the internal pressure is released. 1. Remove bolts 0, then remove cover 0. When removing the cover, be careful not to let dirt or sand get in. 2. Loosen plugs @ and 0, and check that the internal presseure is released. 3.

Insert the scale and check that the oil level is 160 - 180 mm (6.3 - 7.1 in) from the upper face of the inspection hole. If the oil level is low, add engine oil. For details of the oil to use, see “20. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE”. 3-56