8. PRECAUTIONS FOR MAINTENANCE 8.2 DURING MAINTENANCE 4 PERSONNEL 1 l Only authorized personnel can service and repair the ma- chine. Extra precaution should be used when grinding, weld- ing, and using a sledge-hammer. Keep a safe distance 17A-98-11530~ AlTACHMENTS 1 l Place attachments that have been removed from the machine in a safe place so that they do not fall. If they fall on you or others, serious injury could result. A0055130 WORK UNDER THE MACHINE l Always lower all movable work equipment to the ground or to their lowest position before performing service or repairs under the machine. l Always block the tracks of the machine securely.
l Never work under the machine if the machine is poorly suooorted. A0055140 -I KEEP THE MACHINE CLEAN 11 l Spilled oil or grease, or scattered tools or broken pieces are dangerous because they may cause you to slip or trip. Always keep your machine clean and tidy. l If water gets into the electrical system, there is danger that the machine may not move or may move unexpectedly. Do not use water or steam to clean the sensors, monitors, controllers, connectors, or the inside of the operator’s com- partment. 4-e J4iiii!iii A0055150 1-18