Komatsu — 11.1 MONITOR PANEL

11. EXPLANATION OF COMPONENTS 2. HEAD LAMP SWITCH This switches on the head lamps and the panel lamp. When the head lamp switch is on, green lamp on switches 0, 0, 0, @ and @ also come on. 3. REAR LAMP SWITCH This switches on the rear lamp, the ripper lamp and the panel lamp. When the rear lamp switch is on, green lamp on switches a,@, 0, @ and @ also come on. L AD104490 I I 0 =. 0 0 = L J 4. WORKING LAMP SWITCH This switches on the working lamp is front of L.H. and R.H. fenders and the panel lamp. When the working lamp switch is on, green lamp on switches 0, 0, 0, @ and @ also come on. AD104500 0 I 0 I-J hr J AD104510 5.

PREHEATING SWITCH 4I CAUTION Do not use this switch on when APS (Automatic Priming System) is not in use. 0 TRY 0 This switch is used to start the engine by means of APS (Auto- matic Priming System). When the switch is turned ON, the current flows to the glow plugs, warming up the intake air. At this time, the preheat monitor lamp on the monitor panel lights. For details, see “12.2.2 STARTING ENGINE IN COLD WEATHER”. AD104520 0 c> 0 I 6. LOCKUP SWITCH When this switch is ON (red lamp lighted up), the lockup function of the torque converter is actuated.

When the lockup function is actuated, torque converter drive and direct drive are automatically selected according to the load condition of the machine. When the switch is OFF (red lamp OFF), only torque converter drive is used. 0 AD104530 2-13