Komatsu — 12.1 CHECK BEFORE STARTING ENGINE

CHECK DAMPER CASE OIL LEVEL, ADD OIL fiZJ . Remove dipstick 0, and wipe the oil off with a cloth. Insert dipstick @ fully into the dipstick holder, then pull it out again. The oil level should be between the H and L marks on dipstick 0. If the oil is below the L mark, add engine oil through the dipstick holder. For details of the oil to use, see “20. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE”. 4. If the oil is above the H mark, drain the excess oil from drain plug. After draining the oil, check the oil level again. REMARKS l Check the oil level with the engine stopped.

l When checking the oil level, if the machine is at an angle, move it to a horizontal position before carrying out the check. CHECK BRAKE PEDAL TRAVEL 1. Depress the brake pedal all the way until it stops. 2. The distance of travel at the center of the pedal (position in the diagram on the right) should be 100 2 5 mm (3.9 + 0.2 in). 3. When this value exceeds the specified range, or the brake fails to work, please contact your Komatsu distributor for adjustment. / AEl05310 2-42