12. OPERATION 12.1.3 ADJUST OPERATOR’S SEAT l Adjust the seat position at the beginning of each shift or l Adjust the seat so that the brake pedal can be depressed all the way with the operator’s back against the backrest. @ Fore-aft adjustment of seat Pull up handle 0, set the seat to the desired position, then release the handle. Fore-aft adjustment: 160 mm (6.3 in) (12 stages) @ Weight adjustment of seat Turn knob @ so that the indicator of the weight display (kg) inside knob @ shows your own weight. Turn the knob to adjust the weight as follows.
To make LIGHTER, turn COUNTERCLOCKWISE To make HEAVIER, turn CLOCKWISE The weight can be adjusted within a range of 50 - 120 kg (110.3 - 117.8 lb) @ Adjusting reclining angle NOTICE When reclining the seat back to the rear, check the space behind, and adjust to a suitable position. Pull lever 0, set the seatback to a position where it is easy to operate, then release the lever. 2-45