12. OPERATION 12.1.4 ADJUSTING VOLUME OF BACKUP ALARM When the gear shift lever is placed in REVERSE, the backup alarm sounds. When working at night or in other conditions where the environment makes it necessary to lower the volume of the alarm, adjust as follows. (When the machine is shipped from the factory, the sound level is set to the highest (H) level.) Adjusting 1. Remove cover @ at the rear of the right fender. 2. Remove cover @ from the backup alarm. Back up alarm AEl05160 L 3. Change the position of the bridge to adjust the sound pressure. I l The sound pressure of the backup alarm can be adjusted in three stages as shown in table below.
Connection of bridge Level Sound pressure dB(A) Remarks 0 L-H H 112 Frequency @ L-H M 107 1300 Hz AE105170 0 I L-H ILI 97 I l Set the volume of the backup alarm so that it is at least 10 dB(A) louder than the surrounding noise. 2-47