6. When preheating switch @ is turned ON, the red lamp in the switch will light up, preheating monitor @ will also light up, and preheating will automatically start. 0 7m 0 7. Keep in this condition until preheating monitor lamp @ goes out. (Preheating is completed after approx. 80 seconds, and the lamp goes out.) AD104520 8. When preheating monitor lamp @ goes off, turn the starting switch key to the START position and start the engine. A0107680 9. When the engine starts, return the key of starting switch @to the ON position. (Release the key and it will return automatically.) 10.
When the engine runs smoothly and the color of exhaust gas becomes normal, put preheating switch @I in the OFF position. The red lamp on preheating switch goes off. A0072550 J The time which should elapse before turning the preheating switch off varies with the ambient temperature. Confirm the time to the table below: Time from the starting Ambient temperature of engine until turning off the preheating switch Below 0°C 3 - 5 minutes 15 - 0°C 1 - 2 minutes 2-52