12.4 MOVING MACHINE a WARNING When moving machine, check that the area around the machine is safe, and sound the horn before moving. Clear all personnel from the machine and the area. Clear all obstacles from the path of the machine. Use extreme care when reversing the machine. Note there is an blind spot behind the machine. When starting on slopes, always keep brake pedal @ de- pressed even after releasing brake lock lever 0. When starting on steep slopes, set fuel control lever @ to the full speed position, depress brake pedal @ and deceleration pedal @.
Then set gear shift lever 0 in Ist, and slowly release the deceleration pedal and brake pedal at the same time to allow the machine to start. Set safety lock @ for blade control lever and ripper control lever to the FREE position. AEl05270 Operate blade control lever @ and ripper control lever @ to the RAISE position, raise the blade 40 - 50 cm (15.8 - 19.7 in) from the ground. Depress brake pedal 0, place brake lock lever @ in FREE, and > return the brake pedal to home position. Lock 0 Free a I AE105290 1 4. Unlock the gear shift lever with safety lever 0. Free Lock I I AE105300 2-55