SAFETY PLATES 2.1 SAFETY PLATES 2.1.1 POSITION OF THE SAFETY PLATES The safety plates must always be legible and in good conditions; for this reason, if they are dirty with dust, oil or grease, it is necessary to clean them with a solution made of water and detergent. Do not use fuel, petrol or solvents. If the plates are damaged, they must be replace before operation of the product is resumed. Contact your Komatsu Dealer for replacement labels. In case of replacement of a component provided with a safety plate, make sure that this plate is applied also on the replaced component.
The machine can be provided with other plates in addition to those indicated below; which must be followed for safe operation. MACHINE WITH CAB 29 26 31 8 11 13 10 7 6 30 21 20 9 27 28 22 18 24 23 17 5 25 21 19 3 1 16 12 14 4 2 15 RWA33180 18