INSTRUMENTS AND CONTROLS 82 WARNING RWA09000 RWA09000 • During travel and transport of the machine the rotation locking lever must be shifted to the lock position; shift the lever to the lock position after rotating the upper structure so that it is parallel to the undercarriage. • During travel, make sure that the upper structure is direct- ed towards the blade; if the upper structure is rotated by 180°, the controls are inverted. When the lever is in the lock position, it prevents the rotation of the upper structure. To release the upper structure from the mechanical constraint, raise the lever and set it to the unlock position.
IMPORTANT • Do not rotate the upper structure when the lever is in the lock position. RWA09010 RWA09010