Komatsu — 3.5.5 SEAT

GUARDS AND DRIVER’S SEAT 3.5.4 VENTILATION AND HEATING The ventilation and heating of the cab serve to reduce the opera- tor’s stress either in the summer and in the winter; these functions also serve to eliminate the condensate from the front window, thus ensuring visibility during both work and travel. Ventilation and air change are achieved by means of a 2-speed fan positioned inside the cab, under the seat support. Air distribution is achieved by means of two fixed outlets (1) with adjustable capacity for the inner flow, while the flow that has the function to defrost and defog the front window is achieved by means of a fixed outlet (2) with adjustable capacity.

A radiator having the function to heat the air conveyed into the cab is installed beside the fan; it is used in the cold season and receives the hot water necessary for the heat exchange directly from the engine cooling circuit. The water supply flow is divided or excluded by means of a tap (3) positioned inside the engine compartment. 1 1 RWAA0900 2 RWA10200 3 RWA11030 3.5.5 SEAT The seat can be adjusted as follows: a - Longitudinal position adjustment. b - Adjustment of the suspension degree, aimed at cushioning the inevitable vibrations and jerks as much as possible.

The seat is assembled on a unit that slides longitudinally and can be moved forward or backward together with the control levers, the dashboard and the cutout boxes. The operator can thus choose the driving position that is most suitable for his physique. The longitudinal adjustment of the seat is obtained by operating the lever (1) and making the seat slide on the guides; once the desired position has been found, release the lever and carry out slight movements, in order to make sure that the lock pin is en- gaged in its seat. RWAA0930 90