USE OF THE MACHINE 96 3.6.2.2 STARTING WITH COLD ENGINE OR IN COLD CLIMATES WARNING • Do not use any fluid or product that facilitate the cold start- ing of the engine, since these are ether-based and may cause explosions. WARNING • Do not use any fluid or product that facilitate the cold start- ing of the engine, since these are ether-based and may cause explosions. 1 - Pull the accelerator lever until reaching the end of its stroke and turn the ignition key to the preheating position « » the preheating warning light on the dashboard will come on. Keep the key in this position for not longer than 15 seconds in the coldest season.
The preheating time is determined according to the outer tem- perature and the ratio is approximately 1 second per each de- gree below zero. 2- Turn the ignition key to position « » (START) until the engine starts and for maximum 15 seconds. 3 - As soon as the engine starts, release the ignition key, which will automatically return to position « » and reduce the speed to idling. RWA06010 RWA01990 RWA06010 IMPORTANT • If the engine does not start at the first attempt, repeat the operations 1 and 2 after at least 30 seconds, in order not to overload the battery. RWA01970 RWA07360