. MAINTENANCE SERVICE PROCEDURE EVERY 250 HOURS SERVICE CHECK OIL LEVEL IN FINAL DRIVE CASE, ADD OIL WARNING 4 - 51 Maintenanc e for every 50 hour s service sh ould be car ried ou t at the same The oil is at high temperature im mediately aft er the machi ne has been operated. Wait for the oil to co ol down before st arting the operat If there is still pressure remainin g inside the case, the oil o r plug may Loosen th e plug slowly to releas e the pressu 1. Se TOP mark perpendicula r to th e ground surface. 2. Using th e handle, r emove p lug (F). If th e oil is up to the bottom of the p lug hole, th e level is correct. 3. If t he oi l level is low , add oil through th e hole of plu g (F).
Add oil until oil overflow s from th e hole of pl 4. After ch ecking, inst all plug Tightening torque: 68.6 ± 9 .8 Nm (7 ± 1 ± 7.2 lbft)