. OPERATION EXPLANATION OF COMPONENTS on the outside bar graph increases by approx. 0.4 km/h up continuously and the speed, carry out the same (D) on the steering, 3 - 16 VARIABLE SHIFT MODE (CONTINUOU SLY VARIABLE SHIFT MODE) stages from 0.8 km/h (0.5 MPH) to 8.5 km/h (5.3 MPH). The travel speed can be set in 20 stages from 0.8 km/h (0.5 MPH) to In particular, the minimum travel s peed is set low so that work such as loading the machine o nto a trailer or traveling over rough places on the road su rface can be carried out more safely . Furthermore, it is possible to selec t the optimum travel speed over a wider range for work su ch as plowing or winch operations.
Each time UP switch (U) on the shift lever is pressed, two seg light up and the travel speed (0.2MPH). If UP switch (U) on the steering, is kept pressed, the outside ba speed range is set at the point When reducing the set trave operation with DOWN sw forward-reverse, gear shift leve The direction of travel (E) is disp at the bottom right. Nothing is displayed in (F). (E) F: FORWARD R: REVERSE N: Neutral P: Parking brake lever is at at When the starting switch is turn ON position, the speed range i If the mode is shifted from vari able shift mode to quick shift mode, the speed range is s et to the nearest speed range (1st, 2nd, or 3rd).
See the chart below for details of the lighting up of bar graph (G ) around the outside circ umference and the set travel speed. Set trav Speed Gauge No. speed range km/h (M el Set travel Speed Gauge No. speed Gauge No. range PH) km/h (MPH) Set travel Speed speed range km/h (MPH) 1 - 0.8 (0. 2 15 27 5) - 3.8 (2.4) 16 28 - 6.0 (3.7) 3 - 1.0 (0. 4 17 29 6) - 4.1 (2.5) 18 30 - 6.4 (4.0) 5 - 1.5 (0. 6 19 31 9) - 4.5 (2.8) 20 32 - 6.8 (4.2) 7 - 2.0 (1. 8 21 33 2) - 4.9 (3.0) 22 34 - 7.3 (4.5) 9 - 2.4 (1. 10 23 35 5) - 5.2 (3.2) 24 36 - 7.7 (4.8) 11 - 2.9 (1. 12 25 37 8) 2nd 5.6 (3.5) 26 38 - 8.1 (5.0) 13 1st 3.4 (2. 14 39 1) 40 3rd 8.5 (5.3)