Komatsu — SWITCHES

. OPERATION EXPLANATION OF COMPONENTS switch key, all the the engine stops. In the key 3 - 43 STARTING SWIT This switch (1) is used to start or stop the engi (A): OFF positio It is possible to i electric system s witches are turned off, and th addition, the par king brake is automatically app (B): ON position electric current flows to the charging circuit, lam ssory circuit. In this position, circuit, and acce Keep the starting switch key at the ON position while the engine i running. (C): START posi This is the positi while immediately afte r the engine has been started.

The key will retur n to ON position (B) wh en released SPEED RANGE SELECTOR SWITCH Use this switch (2) to switch the speed range. Use this switch ( Use 1st and 2nd for operations, and 3rd and 4t Position (a): 1st Position (b): 2nd Position (c): 3rd Position (d): 4th REMARK When traveling i n 3rd or 4th at high speed (trave l speed: 8 km/h o r more), even if the spee d range is switched t o 1st or 2nd, the engin e overrun prevention function will act to prevent the speed range from s hifting to 1st or 2nd.

If this happens, t he central warning lamp lights up and the alarm buzzer "OVERRUN PREVENTION" is displayed on the bottom line of the character d There are the fol lowing ways to cancel the alar Reduce the tr avel speed to less than 7 km/h . The speed rang e wi ll shift to 1st or 2nd and the alarm buzze r will be cancelled. eed range selector switch to 3rd or 4th. Return the sp eed range selector switch to 3