. OPERATION EXPLANATION OF COMPONENTS METHOD OF OPERATION 3 - 85 COOLING OPERATION 1. Press main power switch (1) of t power ON. 2. Press fan switch (2) and set the 3. Press temperature control swit monitor to COOL (A). 4. Press air conditioner switch (4) switch ON. 5. Press RECIRC/FRESH selector 6. When the temperature inside th temperature control switch and desired temperature. he air conditioner to turn the air flow to "Hi". ch (3) and set the display 1 2 3 4 5 6 . Press power . Press fan switch (2) and set the . Press temperature control swit monito . Press r to COOL (A). air conditioner switch (4) ON. RECIRC/FRESH selector the temperature inside th to turn the air conditioner switch .
Press switch (5) to select RECIRC. . When e cab goes down, use the temperature control switch and desired temperature. the REMAR K If t he te mperature control switch is pr essed to set the display monit or to COOL (A ) and the ai r condition er is run with the air flow at "Lo" for a long period, t here is a slight risk that the e vaporator will freeze. If it freezes and no cold air comes out , turn the air conditioner switc h OFF, raise t he tempera ture settin g, run th e air conditione r with the air flow at "Hi " fo r a short time, then turn the a ir conditioner switch ON again. HEATING OPERATION 1. Press main power switch (1) of t power ON. 2. Press fan switch (2) and set the 3.
Press temperature control swit monitor to HOT (A). 4. Press RECIRC/FRESH selector 5. When the temperature inside temperature control switch and desired temperature. he air conditioner to turn the air flow to "Hi". ch (3) and set the display 1 2 3 4 5 . Press power . Press fan switch (2) and set the . Press temperature control swit monito . Press r to HOT (A). RECIRC/FRESH selector switch (4) to select FRESH. . When the cab goes up, use the the fan switch to set to the the the REMAR K Heatin g is carried out using the engin e cooling water, so it can be carried out when the coo ling water temperature is h igh. DRYING-HEATING AND DEMISTING OPER ATION he air conditioner to turn the 1 2 3 4 5 .
Press main power switch (1) of t ON. power . Press fan switch (2) and set the a ir flow to the desired setting. . Press temperature control switc h (3) and set to the desired temperature. . Press RECIRC/FRESH selector switch (4) to select FRESH. . Press air conditioner switch (5) to turn the air conditioner ON. REMAR K When t he outside temperature is bel ow 0°C (32°F), the air conditioner (compressor) may n ot operate