Komatsu — STARTING ENGINE

. OPERATION OPERATION STARTING IN COLD WEATHER WARNING Sit down in the operator's seat before starting the engine. Ambient temperature Lighting time Above -4 ° C 0 seconds -4 ° C to -15 ° C 5 seconds to 30 seconds Below -15 ° C 30 seconds 2. When preheating pilot lamp (2) goes out, turn the key in starting switch (1) to the START position (C). Keep the key in starting switch (1) at the START position (C) to keep the starting motor running until the engine starts. 3. The starting motor will continue to turn and the engine will start. 3 - 108 Do not a circuit. ttempt to Such an a start the eng ct may caus ine by short-circui e serious bodily in ting the jury or f engin ire.

e starting Check t hat t here are no perso ns or obstacles in the surrounding a rea, the n sound the ho rn and start the engine. Exhaus t ga s is to xic. When st arting th e engine in confined s paces , be particularly carefu l to ensure good ventilation. NOTI CE Do not s uddenly a ccelerate the engine b efore the warming-up operation is completed. Whe n startin g the engine afte r the machine h as been left f or more than half a day in temperat ures near -20°C, it wil take time for the e ngine to ac hieve complete combustion, so operate t he starting switch as f ollows. 1. T urn the key in starting s witch (1) to ON position (B).

the ambient t emperatur e is low, the pre heating pilot lamp (2) ghts up and a utomatic pr eheating is carri ed out. Kee p the key starting switc h (1) at the ON position unt il the preheating pilot mp (2) goes out. The time th at th e preheatin g pilot lamp ( 2) stay s lig hted up depends on t he am bient temp erature as show n in th e tabl e on the right.