Komatsu — OPERATIONS AND CHECKS AFTER STARTING ENGINE

. OPERATION OPERATION NORMAL OPERATION 3 - 112 After th e engine starts, do not s tart operating the machine i mmediately. First, carry out the following operations and checks. NOTICE Do not s complet uddenly accelerate the engine before the warming-up operation is ed. Do not ru minutes. n the engine at low idle or high idle continuously for more than 20 If it i s ne cessary to run the engine at idle, apply a load from ti me t o tim e or run the e ngine at a mid-range spe ed. 1. Depress accelerator pedal (1) lightly and run the engine with no load at midrange speed fo To war m up the hydraulic oil in 2.

Afte r completing the war ming-up operation, check the engine rotation is smooth, then check that the wor k equipment control lever is at the HOL D position and set work equipment lock lever (2) to the FREE 3. Operate work equipment c ontrol lever (3) to TILT position (e) and return it to HOLD posi tion (b) to warm up the h ydraulic oil. The relief time at the tilt pos ition (e) should be a maximum of 10 seconds. Wit h this operation, the oil will reach the relief pressure and t his will warm up the hydraulic oil more quickly.