. OPERATION OPERATION CHANGING DIRECTION WARNING When changing direction between FORWARD and REVERSE, check of even when switching will the 3 - 117 that the new d machine, so b reverse. irection of travel is safe. There is a blind spot behind e particularly careful when chan ging direction to trave Do not switch speed. between FORWARD and REVERSEwhen traveling at h When switchi to reduce the travel. (Max.s ng between FORWARD and REV travel speed sufficiently, then ERSE, depress the br change the direction peed for changing direction: 13 km/h (8.1 MPH)) There is no n eed to stop the machine WARD and REVERSE. between FOR Place direction al lever (1) in the desired po Position (a):
F ORWARD UTRAL EVERSE Position N: NE Position (b): R Check that t he backup alarm sounds whe n the directional lev er is set to REVERSE. If th e backup alarm doe s not se contact your Komatsu dis REMARK al lever is operated slowly or is stopped midway between the forward and reverse directions, "E01 If the direction is stopped midway reverse directions, "E01 MAINTENANC E" may be displayed on the character display. I n this case, there is no failu re, but try to operat e the directional leve r so that the change in direc tion is completed w ithin 2 seconds.
If an attempt is made to switch the directio n between FORWA and REVERS E while traveling at high spe ed, if the travel spe and engine sp eed are in the hatched range shown in the diagra the central wa sound. At the same t rning lamp will light up and the alarm buzzer ime, "OVERRUN PROTECT" is displayed on he character display. bottom line of t he character display. If the alarm buz zer sounds, return the direct ional lever immediat to its original p then operate t osition, depress the brake p edal to reduce spe he directional lever to switch between FORWA . ed (km/h) eed (rpm) and REVERSE (X): Travel spe (Y): Engine sp