Komatsu — WORK POSSIBLE USING WHEEL LOADER

. OPERATION OPERATION DIGGING OPERATIONS WARNING NOTICE LOADING PILED SOIL machine control 3 - 129 WORK POSSIBLE USING W In addition t o the following, it is poss ible to further increase t he rang e of applications by using v arious attachments. Never dig or scoop with the machine articulated. There is dange r that th e machine may tip over. Never raise the boom with the bucke t fully loaded when the ma chine is articulated. There is danger th at the machine may tip over. When the machine is traveling or the work equipment is raised, the moment that the ECSS switch (if e quipped) is turned ON, th e work e quipment will move.

If operatio ns are carried out with the ECSS switch (if equipped) l eft at th e ON position, the moment tha t the ECSS is actuated, th e work e quipment may move. When the boom is below the horizon tal position, if the bucket i s operat ed further from the maximum t ilt, the boom may rise. If the buck et is operated to the DUMP position immediately afte r that, th e boom may go down slightly. If t he tires slip , the tire life will be reduc ed, so do not allow the tire s to slip Scoop up the piled soil by movin g the machine forward a s show n below. If the tires begin s lipping under heavy load, rais e the bucket slightly to .

Force th e bucket into the pile of soil while moving the m orward. . Thrust t he bucket fully into the soil, then drive the m f t l f orward and operate the work e quipment control lever t he lift a rm. In addition, operat e the work equipment ever oc casionally to tilt the buc ket so that the bucket ully loa Try to ke ep the load in the cente r of the bucket; if the loa one side of the bucket, the load will be unbalanced.