Komatsu — PARKING MACHINE

. OPERATION OPERATION BUCKET LEVEL INDICATOR (A) and (B) at the top rear of the bucket are the level indicators. They check the bucket angle during operations. (A): Parallel with cutting edge (B): 90 degrees to cutting edge PARKING MACHINE WARNING lights, therefore keep the brake pedal depressed. stop the machine. 3 - 139 Avoid stopping sud denly. Give yourself ampl e room whe n stoppi Do not park the ma Ifthe machine has t slope, then dig the b to prevent the mac o be parked on a slope, set it facin g directly dow n the ucket into the ground and p ut blocks u nde r the tires hine from moving.

If the control lever is touched by accident, th e work equipment o r the machine may move Before leaving th equipment lock lev suddenly, and this may le ad to a serious accident. e operator's compartment , always set the work sition. work er securely to the LOCK po sition. Even if the parking there is a danger o brake lever is pulled and s f the machine moving until et to t the p he L arkin OCK position, g brake lamp NOTICE Never use the parkin g brake lever to slow the machine when traveling hen traveling except in an emergen cy. Apply the parking brak e only after the machine has stopped. 1. Release accele rator pedal (1), then depress b rake pedal ( 2) to