Komatsu — GUIDES TO MAINTENANCE

. MAINTENANCE GUIDES TO MAINTENANCE BLEEDING AIR FROM HYDRAULIC CIRCUIT: If the hydraulic oil equipments have been repaired or replaced and if the hydraulic have been disconnected, it is necessary to bleed air from the circuit. See "CHANGE OIL IN REPLACE HYDRAULIC FILTER ELEMENT (PAGE 4-63)". 4 - 3 DUSTY WORKSITES: as follows: to avoid clogging. quently. cially the starting motor and alternator, to avoid accumulation of dust. When working at dusty worksites, do Clean the radiator core frequently Clean and replace the fuel filter fre Clean electrical components, espe cially the starting motor and alternator, to avoid accumulation o f dust.

When inspecting or changing the o il, move the machine to a place that is free of dus t to prevent di rt from getting into the oil. AVOID MIXING OIL: If a different brand or grade of oil has t o be added, drain the old oil and replace all the oil with the new b rand or grade of oil. Never mix different brand or gr ade of oil. LOCKING INSPECTION COVERS: Lock inspection cover securely into position with the lock bar. If inspection or maintenance is performed with with inspection cover not locked in positio n, there is a danger that it may be suddenly blow shut by the wi nd and cause injury to the worker. heck that it is not locked with the lock bar.

ught to bear on it, there is danger that it may become deformed. When closing the inspection cover, c If it is locked and a strong force is bro ught to bear on it, there is danger that it may becom e deforme oses , pipes, et TAN PRECAUTIONS WHEN INSTALLING HYDR AULIC HOSES: where there are O-rings or gasket seals, clean the mounting surface, and forget to assemble the O-rings and gaskets. When removing parts at locations replace with new parts. When doing this, be careful not to When installing the hoses, do not t wist them or bend them sharply. If they are installed so, t heir s ervice life will be shortened extremely and they may be damaged. CHECKS AFTER INSPECTION AND MAINT ENANCE:

If you forget to perform the checks afte r inspection and maintenance, unexpected problems may occur , and this may lead to serious injury or property dam age. Always do the following: e stopped) enance points been forgotten? nance items been performed correctly? Checks after operation (with engin Have any inspection and maint Have all inspection and mainte Have any tools or parts been d inside the machine and get cau Are there any leakage of coolan ropped inside the machine? It is particularly dangerous i f parts are dropped ght in the lever linkage mechanism. t or oil? Have all nuts and bolts been tightened? t or oil? Have all nuts and bolts been tightened?

Check when the engine is running See "TWO WORKERS FOR M safety for checking when the en Check if the inspected and mai Increase the engine speed to c AINTENANCE WHEN ENGINE IS RUNNING (PAGE 2-37)" in t he sectio n on gine is running. Pay attention to safety. ntenance area is operating normally. heck for fuel and oil leakage.