. MAINTENANCE RECOMMENDED FUEL, COOLANT, AND LUBRICANT NOTICE Note 1: HTHS ( High-Temperature High-Shear Viscosity 150 ° C), specified by ASTM D4741 must be equal to or higher than 3.5 mPa-S. Komatsu EOS0W30 and EOS5W40 are the most suitable oils. RECOMMENDED BRANDS, RECOMMENDED QUALITY FOR PRODUCTS OTHER THAN 4 - 11 Always use dies el oil for the f To ensure good f uel consumption characteristics and exhaust gas chara cteristics, the engine mounted on this machine use s an electronically co ntrolled high-pressure fuel injection device. This devic e requires high precision parts and lubrication, so if low viscosity fuel wit h low lubricating ability is used, the durability may dro Note .2:
Power train of oil has different properties from engine o Note .3: Axle o il AXO80 ha s the function of preventing squealing f rom the brakes and LSD (Limited Slip Differential). AXO80 is r ecommended, use Komatsu genuine Note .4: When the ambien t temperature is higher than 45°C (113 °F) and the machine operation hour is longer t han 12 hou Squea durabi For m rs/day, the n the use of TO50 instead of AXO80 i achines with LSD, use AXO80 regardless of the a Note .5: Hyper grease (G2-T, G2-TE) has a high performance. When and bu it is necessary to improve the lubricating ability o f the grease in order to prevent squeaking of pins shings, the use of G2-T or G2-TE is recommend ed. Note .6:
Super coolant (AF-NAC) n as well as preventing freezing. ntifreeze coolant is essential. (AF-NAC). Komatsu Supercoolant (AF-NAC) has 1) The coolant has the important function of preventing corrosio Even in the areas wher e freezing is not an issue, the use of a Komatsu ma chines are supplied with Komatsu Supercoolant (AF-NAC). Komatsu Supercoolant (AF-NAC) has excellent ant icorrosion, antifreeze and cooling propertiesand c an be used continuously for 2 years or 4000 hours. Komatsu Su percoolant (AF-NAC) is strongly recommended w 2) For details o (PAGE 4-20 When the m achine is shipped from the factory, it may be filled with coolant containing 30% or more Supercoolant (AF-NAC).
I n this case, no adjustment is needed for temperatu res down to -10°C (14°F). (never dilute with water) 3) To maintain the anticorrosion properties of Supercoolant (AF-NAC), always keep the density of Supercoolant % and 68%. between 30 % and 68%. KOMATSU GENUINE OIL When using co mmercially available oils other than Komatsu gen uine oil, consult your Komatsu distributor.