Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE Be careful not to let dust get into the fluid. CLEAN RADIATOR FINS AND COOLER FINS WARNING CLEAN FINS BY ROTATING COOLING FAN IN REVERSE MANUAL FAN REVERSING METHOD NOTICE 4 - 27 CHECK WINDOW WASHING FLUID LEVEL, ADD FLUID 1. Open the top cover at th Check the washing fluid fluid has run low, add a 1. Open the top cover at th utomotive window washing fluid Never open the engine side operation. cover when the engine is running. Stop the engine completely before starting the cleaning eaning If compressed air, pressuriz ed water, or steam hits your body directly, or causes dirt to fly , it may lead to personal injury.

Always wear safety glasses, dust mask, or other protective equipment. g. Stop Clean the radiator fins if any mud or dirt is stuck to the radiator NOTICE When rotating the fan in revers e, be careful of flying dust, and be not to let any cloth get caught i Dust may rise, so check that th ere is no one in the surrounding are rotating the fan in reverse. On jobsites where it is easy for dirt to stick to the radiator or c turn cooling fan reverse rota tion switch (1) ON to rotate the fan reverse.

This will blow off th e dirt and dust stuck to the radiator cooler, and can extend the Never rotate the fan in rever se by hand when carrying out the o peration Before operating the fan rev erse rotation switch, run the engine at l ow i dling. 1. Set the directional lever to the Neutral position. 2. Set the parking brake le ver to the LOCK position, then apply th e parking brake se 3. Run the engine at low id ling.