. MAINTENANCE SERVICE PROCEDURE REPLACE SLOW BLOW FUSE NOTICE 4 - 36 Always turn the p ower OFF when r eplacing the slow b low fuse (turn the starting switch to the OFF position Always replace t he slow blow fuse with a fuse of the I f th e slow blow fu se should blow, check for the ca use and take the necessary action. The slow blow fus e is at the side o f the engine on th e left side of the machine. ng switch to the OFF position. low blow fuse box from the chassis. (1), (2), and (3) of the slow blow fuse box. 1. 2. 3. 4. 5. 6. 1. Turn the starti ng switch to the 2. Remove the s low blow fuse b ox from the cha 3.
Open covers (1), (2), and (3) of the slow blow Covers (2) an d (3) can be re moved easily by using protrusion (A) on the bod y as a fulcrum a nd levering the c atch of the cover with a flat-hea ded screwdrive r to release it. nd remove. 4. Loosen screw s (4) and (5), a When screws (4) and (5) are removed, slow b low fuse (6) will also come off together with e lectric wiring (7) and (8). 5. Using screws (4) and (5), inst all a new slow blo w fuse together with electric w iring (7) and (8 ) to the slow blo w fuse box, then close covers ( 1), (2), and (3). to the chassis. 6. Install the slo w blow fuse box