. MAINTENANCE SERVICE PROCEDURE CHANGE AXLE OIL WARNING REMARK Remove the mud and dirt from around plug (1), then remove the plug. (PAGE REPLACE ELEMENT IN AIR CONDITIONER RECIRCULATION AIR FILTER, FRESH AIR FILTER 4 - 65 When chan ging the oil, apply the park ing brake and secure the f ront and rear frames with the fr ame lock bar. After the e ngine is stopped, the parts and oil are at high temper ature, and may cause burns. W ait for the temperature to go down befo re starting the operation. urt out, so turn it slowly to release the internal pressure, then remove it carefully.
When the p lug is removed, oil may sp urt out, so turn it slowly to release the internal pressure, t Refill cap acity (front and rear, eac h): 24.0 liters (6.34 US A : Front 1. Set a co ntainer to catch the oil u nder drain plug (P). 2. Remove plug (1), then remove d rain plug (P) to drain th 3. After dra ining the oil, clean drain plug (P) and install it a 4. Add oil t hrough plug hole (1) at t he refill level. 5. After ad ding oil, check that the o il is at the specified leve details, 4-25)".
see "CHECK AXLE OIL LEVEL, ADD OIL (P REMARK For operatio ns where the brake is u sed frequently, change t he axle oil at shorter interva Remove bot h the recirculation air filt er and fresh air filter in th e same way as when cleani ng, and replace them with new parts. For details o f cleaning the recirculati on air filter, see "CLEAN ELEMENT IN AIR CONDITI ONER RECIRCULATION FILTER (PA GE 4-51)". f cleaning the fresh air filter, see "CLEAN ELEMENT IN AIR CONDITIONER FRESH AIR FILTER )". For details o (PAGE 4-45