. SAFETY PRECAUTIONS FOR MAINTENANCE or other rotating parts. There is danger that they may contact the rotating parts and break or be sent flying. Lower the work equipment completely to the ground, then set work equipment lock lever (1) to the LOCK position to prevent the work equipment from moving. Pull parking brake lever (2) to the LOCK position to apply the parking brake, then put blocks under the front and the rear of the tires to prevent the machine from moving. Be careful not to touch the control levers or steering equipment. If the control levers must be operated, always give a signal to your partner and have your partner withdraw to a safe place.
2 - 37 TWO WORKERS FOR MAINTENANCE WHEN ENGINE IS RUNNI NG To prevent personal in jury, do not carry out maintenance with the engine running. If m aintenance must be carried out with the engine run ning, carry out the operation with at least two workers and do a One worker must al ways sit in the operator's seat and to stop the engine contact with the oth When carrying out rotating parts, there be careful not to co is a hazard of being caught in the Never drop or insert tools or other objects into the fan TURNING E.C.S.S. SWITCH OFF BEFORE CARRYING OUT INSPECTION AND MAINTENANCE d, turn the E.C.S.S. switch For machines equippe d with the E.C.S.S.
(if equipped), lower the bucke t to t he groun OFF, and stop the eng ine before starting inspection or m aintenance. NEVER turn the s witch ON during in spection or maintenance.