. OPERATION EXPLANATION OF COMPONENTS When the parking brake is applied, the lamp goes out and the buzzer stops. HST OIL TEMPERATURE CAUTION LAMP This lamp (4) lights up to warn the operator that the HST oil temperature has risen. 3 - 17 QUICK COUPLER OPERATION PILOT LAMP This lamp (2) lights up and the buzzer sounds intermittently when the quick coupler is relea sed. At the same time, "PIN on the bottom line of the character coupler, press the quick coupler the lock, then operate the work DISCONNECT" is displayed display. When releasing the quick attachment switch to apply equipment attachment lever.
If this lamp is lighted up at any time except when the quick coupler is being released, it means th at there is a problem in the quick coupler solenoid actuation circ uit. Move the machine immediately to a safe place, stop the engin e, then carry out inspection. PARKING BRAKE REMINDER CAUTION LAMP If the engine is stopped and th e parking brake is not applied, this parking brake reminder cautio n lamp (3) lights up together with the central warning lamp, and the to warn the operator. At the same time, "APPLY alarm buzzer sounds intermittently PKG BRAKE" is displayed on the bottom line of the character dis play, so pull the parking brake lever fully to apply the parking brake .
During checks before starting ( when the starting switch is turned to the ON position but the engine is not started), this monitor does not light up. During operation (engine runn ing) e goes up, the HST oil temperature When the HST oil temperatur caution lamp and central war ning lamp light up, and the alarm buzzer sounds intermittently. At the same time, "E02" is dis played on the character display and "HST OVERHEAT" is display ed on the bottom line, so stop the machine and run the engine a t a mid-range speed under no load until the lamp goes out.