. OPERATION EXPLANATION OF COMPONENTS RESET METHOD FOR FILTER, OIL REPLACEMENT TIME display "TRACTION LEVEL". 2. Press part (>) or ( 2 to display "MAINTENANCE MONITOR". 3 - 35 The filter and oil replacement tim e is displayed on the character display, so i f th e filter an d oil ha ve bee n replaced, reset the filter and oil change tim 1. Press part (U) of machine m 3. Press the () portion of the switch 1. The screen switch right. The replacement interval is s and the number of times of r machine monitor mode selector es to the display shown on the hown on the bottom line at the left eplacement is shown on the right.
of the machine monitor mode he filter or oil item that has been to reset, see "FILTER, OIL LAY (PAGE 3-11)". machine monitor mode selector es to the display shown on the SET" are displayed on the top line ment interval, press the (>) or ( 4. Press the (>) or ( 5. Press the () portion of the switch 1. The screen switch right. "RESET" and "ITEM TO RE in turn. 6. When resetting the replace portion of the machine monit cursor on "YES", then pres monitor mode selector swit screen returns to the previou To abort the operation, set th () portion of the machine m 7. When resetting the replacem ent interval for another item, repeat the procedure from Step 4 .
After completing the resetting operation, pres starting switch OFF. s the () portion of the machine monitor mode selector switch 1 twice or turn the r mode selector switch 1 twice or turn the