Komatsu — 13.3 LIFTING POSITIONS

13. TRANSPORTATION 13.2 PRECAUTIONS FOR LOADING, AND SECURING THE MACHINE After loading to the specified position, secure the machine as follows. Lower the work equipment slowly. Lock all the control levers securely with the safety lever. Set the parking lever to the LOCK position. Set the fuel control lever to the engine STOP position and stop the engine. Then turn the starting switch to the OFF position and remove the key. 5. Lock the cab door, left and right engine side covers, and battery inspection cover. 6. Put blocks under the front and rear of the tracks, and secure with chains or wire rope of a suitable strength to prevent the machine from moving during transportation.

Be particularly careful to prevent the machine from slipping to the side. 13.3 LIFTING POSITIONS When lifting the machine, use the positions shown in the dia- gram on the right. Always stop the engine and set the parking brake lever to the LOCK position. AE201050 2-68