Komatsu — 24.2 WHEN REQUIRED

l When loosening tension It is extremely dangerous to release the grease by any method relieved by this procedure, please contact your Komatsu dis- 1. Loosen lubricator @ gradually to release the grease. 2. Turn lubricator @ a maximum of one turn. -- 3. If the grease does not come out smoothly, move the machine backwards and forwards a short distance. 4. Tighten lubricator 0. To check that the correct tension has been achieved, move the machine backwards and forwards. AE111560 5. 6. Check the track tension again, and if the tension is not correct, adjust it again. l When removing track &L WARNING Depending on the situation, the operation to remove the track may be extremely dangerous.

Before removing the track, if the procedure above “When loos- ening tension” does not loosen the track tension, please contact your Komatsu distributor for repair. 3-26