24. SERVICE PROCEDURE 24.6.3 CHANGE OIL IN STEERING CLUTCH CASE (INCLUDING TRANSMISSION CASE AND TORQUE CONVERTER CASE), WASH STRAINER 7 g WARNING p The oil is at high temperature immediately after the machine has been operated. Wait for the oil to cool down before starting the operation. Prepare the following. l Container to catch drained oil: Min. 90 e capacity l Refill capacity: each 90 I? (23.76 US gal, 19.8 UK gal) l Socket wrench 1. Remove the cover under the chassis, then set a container under drain plug @ to catch the oil. 2. Taking care not to get oil on yourself, remove drain plug @ slowly, drain the oil, then tighten drain plug @ again. 3.
Remove the guard inspection cover under the chassis, then set a container under drain plug @ to catch the oil. 4. Taking care not to get oil on yourself, remove drain plug 0 slowly, drain the oil, then tighten drain plug @ again. AE112010 5. Remove mounting bolts @from the strainer cover, then remove cover 0. 6. Take out strainer @ and magnet @from the steering clutch case. / AE112020 7. Remove the dirt from strainer @ and magnet 8, and wash in clean diesel oil or flushing oil. Wash the inside of the case also, then install strainer @ and magnet @. 3-51