27.2 ADJUST THE BELT LENGTH IN THE FOLLOWING MANNER I 272.1 TO SHORTEN THE BELT I Pull the free end of the belt on either the buckle body or tongue side. 27.2.2 TO LENGTHEN THE BELT Pull the belt while holding it at a right angle to buckle or tongue. Inspect bolts and fittings on the chassis for tightness. Retighten any loose bolts to 25 2 5 Nm (2.5 + 0.5 kgm, 18 2 3.6 Ibft) torque. If the seat is scratched or frayed or if any of the fittings are broken or deformed from long service, replace the seat belt immediately. AM088720 5-4